Autumn was a pretty fun piece for me, it's been a long time since I had the opportunity to work in a hard polymer clay (seems many of the shipments I've used have been really soft). Also I've really been enjoying using Magic Sculpt with my polymer pieces... it's just so strong it really opens the possibilities sculpturally speaking.  I'm delighted with the results.  She's a dainty little fae, with a sassy attitude... you may be bigger, but she's not even remotely intimidated by you!

Sold

I've always wanted to do a centaur but been a little leery of how disastrous  the result might be.  Actually I was very pleased with how this one turned out!  Buttercup is my version of the "All American" Centaur, and actually I think she won't be the last I make, it was just too enjoyable.  This figure is just under 5 1/2 inches tall.

Sold

Orville was inspired by the idea of flight, believe it or not, many of my faeries seem to just have wings as a formality... guys like Orville really know how to use 'em!  Goggles at the ready this little guy is prepared for high altitudes and fast flying!  Orville is 2 3/4 inches in his squatting position.

Sold

Oh dear Henry!  This piece was really close to my heart.  Dear clueless little carpenter, with his miniature hammer and nails prepares to "fix the hole in the bucket."  Inspired from a childhood favorite (folk song) 'There's a hole in the bucket' in which Henry and Liza banter back and forth on how one can fix such a thing, I literally hummed and sang throughout his entire creation!

Henry is 3 1/2 inches seated on his oversized cork.  His hammer and nails were real miniature tools (metal and wood) and his wooden bucket came supplied with ... a hole!

Sold

Saul is a jolly old fellow, a looker in his own way, and a wonderful companion.  I don't think I've ever had such a smooth time with creation as I did with this fellow, he nearly created himself!  He is 4 1/2 inches tall with out his cute little base, he sat on an ionic column quite merrily, but would have been just as pleased to plop down on nearly any shelf or ledge.

Sold

Simion, like Saul is an easy going faerie, but today he's thrilled because he's found a real prize!  Simion, like so many of this relatives here in this gallery, is sculpted in polymer clay.  This figure sits at 3 inches tall, and is accessorized with a loose fitting loin cloth and a tiny cap, with a single inset faux ruby.

Sold

Standing a whopping 4 1/2 inches tall, Shim may not look like a threat but he is very capable of holding his own.  Shim was designed as a guard in the Faewee Forces.  He's a pleasant enough fellow, who'd rather chat with you than actually have to shout out the expected "state you name and business' nonsense.  He has been spied occasionally humming and swaying while on duty (when he thinks no one is watching).

Sold

Flint is the Official #1 of my Faewee series, personally I think he's the cutest I've done.  A real sweetheart, he sits a whopping 3 inches tall.  The concept behind the 'Faewee' is they are a people who although magical by nature have chosen to lead lives using magic sparingly.  The FMCC (Faerie Magic Conservation Council) is made up of a large number of conscientious (although simple minded ) faerie folk who believe they are making a difference!

Sold

Chance is a member of the Faewee society, although not one of their most trustworthy members.  He's known as a trickster, and though he is a part of  the tribe known for magic conservation he's notorious for using his to dupe his subjects!  Don't be fooled by his sweet demeanor!

Chance is a polymer creation, and he stands 3 3/4 inches tall.  He is a One Of A Kind.

Sold

Giggles is a fun fellow who sits atop a custom sculpted mushroom as he's gently tickled by his little friend "Squeak."  Giggles is the #3 in the Faewee series, and I guess Squeak could be considered an honorary 3 1/2.  Squeak is permanently attached to the base (which is sculpted in Magic Sculpt).

This piece is 7 1/4 inches tall.

Sold

Minia is a real sweetie, tiny and serene, she sits pensively contemplating her future.  The #4 in the Faewee series, and by far the smallest at just under 2 inches (seated) this little one stole my heart! 

Minia is a one of a kind

Sold

Charming little Zip is the first speckled little faewee, also he is the first with a new (for me) kind of wing.  His wings are a clear flexible polymer, which actually I couldn't stop playing with!  This little guy is 3 inches tall in his squatting position.  Zip is an official 'Faewee' letter carrier, a faerie on the GO GO.

Sold

"Widdol" is the first StudioWillich baby and the whole faewee community is all abuzz with her arrival!  This tiny little princess is sculpted in polymer clay from her headband down to her tiny toes.  Her wings are "new" and are soft to the touch, and rubbery.  This little one had been dusted with just a dash of pixie dust which gave her the sparkle of the newly born.  At just barely 3 inches long this is truly a "Widdol Faewee."

Sold

Darling little Polly Wog sleeps sweetly with her little stuffed seahorse in the warm summer sun.  Snuggled into a water lily you can tell this little mermaid is having sweet dreams!  Polly (and pink pony) is sculpted in assorted polymer clays, both tinted and flesh, and is hand painted with shimmering blues and greens.  Polly is 3 inches long from pigtail to fin tip.

Sold

Hidden was an inspired piece, when I saw this lovely piece of wood, I knew JUST what I wanted to do with it!  The wood was 18 inches long, and had been kiln dried and sandblasted smooth.  Hidden had  lovely flowing blonde hair and black glass eyes.  Her hair was decorated with real dried flowers.  Her body was sculpted in polymer clay with just a splash of  color to bring her to life.  This was a wall hanging.

Sold

Tippy Toe was a very long project, only.  I really only wanted to experiment with the hand made flowers instead of hair.  She is hand sculpted in polymer clay (over armature) and hand painted in acrylics.  Her eyes are black glass and she has 'real eyelashes.'  I did get a real kick out of her pose, but she was very "springy" while sculpting *chuckle*

Sold

Laughlin was a practice in conveying emotion... she has gotten varied responses ranging from "scary" to " adorable."  I suppose it depends on the tastes of the viewer, but I really enjoyed creating her.  She is entirely "dressed in flowers" and is a staggering 3 1/2 inches tall.  Laughlin has inset high gloss (plastic) doll eyes and real (or as real as 3D anyhow) eyelashes!  And she has great teeth to boot!  Funky kitchen WIP pics can be seen by clicking on the highlighted term.

Sold

The very first in a planned faerie series called  Blackwood faeries... Thyme was sold to a private collector in Austria, she was a lovely little fae with hand painted eyes and leather attire.  She was a Blackwood Faerie Scout (a watcher in the wood) entirely sculpted by hand, an original sculpture and a delight to create.  I do have 2 work in progress pics of her you can see by clicking either on WIP1 or WIP2.

Sold

updates to follow

Sold